輪胎清洗機的開發以市場需求定位，在LTQXl型的基礎上做了較大改進和提高，主要適用于建筑工地、礦山、垃圾填埋場、采石場等地方的出口處。在項目組設計人員的精心設計下，LTQX2型清洗機結構緊湊，不僅能清洗不同軸距的各種單、雙后橋車輛；還能夠有效清除車輛清洗后留下的泥沙和臟物，并可實現水循環再生。

The development of tirecleaning machine（www.craicto.com） is based on the market demand, and has made great improvementand improvement on the basis of LTQXl model, which is mainly applied to theexport of construction sites, mines, landfills, quarry and so on. Under the carefuldesign of the project design team member and LTQX2 cleaning machine, compactstructure, can not only clean the different wheelbase of all single, dual rearaxle vehicle; also can effectively remove the vehicle cleaning after leavingthe sediment and dirt, and can achieve water recycling.

激光清洗技術是近10年來飛速發展的一種新型清洗技術，它以自身的很多優點在很多領域中逐步取代了傳統清洗工藝。

Laser cleaning technology isa new type of cleaning technology developed rapidly in recent 10 years. It hasgradually replaced the traditional cleaning technology in many fields with itsown advantages.

激光清洗技術是指采用高能激光束照射工件表面，使表面的污物、銹斑或涂層發生瞬間蒸發或剝離，高速有效地清除清潔對象表面附著物或表面涂層，從而達到潔凈的工藝過程。

Laser cleaning technology isreferred to as the high-energy laser beam irradiation on the surface of theworkpiece, flash evaporation and stripping of the surface dirt, rust orcoating, the high speed effectively remove clean object attached to the surfaceof the material or surface coating, so as to achieve the clean process.

激光清洗機就其用于模具清洗的機理而言，就是利用清潔基片(也稱為母體)與表面附著物(污物)對某一波長激光能量，具有差別很大的吸收系數。輻射到表面的激光能量，大部分被表面附著物所吸收，使之受熱或汽化蒸發、或瞬間膨脹，并被表面形成的蒸汽流帶動，脫離物體表面，達到清洗目的。

Laser cleaning on themechanism of the mold cleaning, is to use a clean substrate (also known as thematrix) and surface attachments (dirt) on a wavelength of laser energy, with asignificant difference between the absorption coefficient. Radiation to laserenergy of the surface, most of them are attached to the surface of theabsorption, so that heat of vaporization or evaporation, or a moment expansion,and is formed on the surface of the steam flow is driven, from the surface ofthe object, to achieve the purpose of cleaning.

具體用于輪胎模具清洗，模具吸收特定波長的激光，能量極小，不會造成損傷，模具表面污物(硫化物、無機氧化物、硅油、炭黑等)吸收大量的能量，被瞬間膨脹、汽化蒸發，帶離模具表面，從而達到清洗的效果。

Specific for cleaning tyremould, mold to absorb certain wavelengths of laser, minimal energy and does notcause damage to the, mold surface dirt (sulfide, an inorganic oxide, siliconeoil, carbon black, etc.) absorbing a lot of energy, moment expansion andvaporization, take away from the mold surface, so as to achieve the effect ofcleaning.